Low-Loss Header
The B&G low-loss header, Model PSH, is a combination air
separator and manifold that creates independent primary and secondary circuits.
The Bell & Gossett low-loss header, Model PSH, is a combination air separator and manifold that creates independent primary and secondary circuits. It is equipped with a purge valve, allowing the user to remove any debris deposited on the bottom of the vessel, and an air vent releasing trapped air in the system. The insulation prevents water vapors entering from the outside, and eliminates the formation of condensate on the PSH body.
The Bell & Gossett low-loss header, Model PSH, is a combination air separator and manifold that creates independent primary and secondary circuits. It is equipped with a purge valve, allowing the user to remove any debris deposited on the bottom of the vessel, and an air vent releasing trapped air in the system. The insulation prevents water vapors entering from the outside, and eliminates the formation of condensate on the PSH body.
Visit www.bellgossett.com for additional information.
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!
