PEX Uncoiler
The UC1 Uncoiler from Malco Products can be used for hydronic in-floor radiant heating layout and for
running potable tubing.
The UC1 Uncoiler from Malco Products Inc. can be used for hydronic in-floor radiant heating layout and for running potable tubing. The open case serves as the unit’s base. No tools are required to assemble. A heavy-duty turntable supports a full coil of PEX and an eyelet loop opens for easy feeding or removal of tubing from uncoiler unit.
The UC1 Uncoiler from Malco Products Inc. can be used for hydronic in-floor radiant heating layout and for running potable tubing. The open case serves as the unit’s base. No tools are required to assemble. A heavy-duty turntable supports a full coil of PEX and an eyelet loop opens for easy feeding or removal of tubing from uncoiler unit.
The UC1 Uncoiler takes up very little space in a truck or van. The entire unit stores in a steel-reinforced plastic case measuring 40" x 17" x 5". Carrying weight is only 50 lbs. Accommodates all types of PEX tubing: 1,000 feet of 3/8" to 1/2" or 500 feet of 5/8" to 1".
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!
