All boilers that burn hydrocarbon fuels such as natural gas, propane, oil or wood produce water vapor as a byproduct of combustion.

I’ve written it before and I’ll write it again — panel radiators are one of my favorite hydronic heat emitters. I base this sentiment on several benefits. Here are a few to consider…

I’ve covered pellet-fueled boiler applications in several past issues of PME. All of them have involved hydronic distribution systems. While such applications are certainly the prevailing way pellet boilers are used, they are not the only option. It’s possible to couple a pellet boiler to a forced air distribution system.

The choice between ∆T and ∆P operation of a circulator has, at times, been the subject of rather “heated” debates. It’s almost as if a few Yankee fans are disputing superior pitching or batting performance with a few Red Sox fans. There appears to be some strong opinions involved.

As building codes and programs such as Energy Star and Passive House require higher degrees of air sealing in new construction, the use of heat recovery ventilation (HRV) is increasing.

Nearly all closed-loop hydronic heating and cooling systems are supposed to be filled with water or a mixture of water and antifreeze. The only intentional air in the system is that contained in the expansion tank.

All hydronic systems designed around renewable energy heat sources — as well as those designed around conventional boilers — have at least one controller that measures and responds to temperature. Common examples are temperature setpoint controllers, outdoor reset controllers, mixing controllers and differential temperature controllers. Complex systems that operate in multiple modes, or use multiple heat sources, often have several temperature-based controllers.

As global energy planning moves away from fossil fuels and toward electricity, an increasing number of hydronic heating systems are being supplied by heat pumps. Some use water-to-water heat pumps supplied by geothermal earth loops. Others use air-to-water heat pumps.

As residential building codes and energy conservation standards continue to evolve, many are requiring proof of high quality air sealing.

Heated floor slabs, without floor coverings, have one of the lowest supply water temperature requirements of any radiant panel system. This makes them well-suited for use with renewable energy heat sources such as air-to-water heat pumps, water-to-water geothermal heat pumps, biomass boilers and solar thermal collectors.